Opel Manta 400 GrB Finley C Sainz – Belkits 1/24 (y V)

Ultima entrada del Opel Manta GrB de Carlos Sainz!! El coche ya lo he terminado y es el primero de este año 2018!!

Last entry of the Opel Manta GrB of Carlos Sainz !! The car has already finished and is the first of this year 2018!

Pero antes de todas las fotos, los últimos detalles. Empezamos enmarcando la carrocería para pintar los marcos de las ventanas con negro Semi Mate x18 de tamiya, diluido. Hay que tener cuidado porque en las ventanas delantera y trasera no hay marco, con lo que hay que enmascarar muy fino:

But before all the photos, the last details. We started by framing the bodywork to paint the window frames with black Semi Matt x18 tamiya, diluted. You have to be careful because in the front and back windows there is no frame, which must be masked very thin:

Y le doy con el aerógrafo pero como veis…muchos granos!

And I give it to him with the airbrush but as you can see … many grains!

La pintura salió muy seca y al quitar las máscaras se llevó mucha pintura porque era muy gorda. El problema fue que tenía el compresor con pocos bares de presión…

The painting came out very dry and when removing the masks it tooks a lot of paint because it was very fat. The problem was that I had the compressor with few pressure bars …

Lo bueno que tiene el x18 sobre laca es que con un algodón mojado en disolvente x20A se elimina todo. Una vez limpio y con buena presión, todo fue muy bien, como siempre!!

The good thing about the x18 on lacquer is that with a cotton soaked in solvent x20A everything is eliminated. Once cleaned it and with good pressure, everything went very well, as always !!

Aprovechamos a pintar el interior y después de seco, a pegar las rejillas y los faros.

We take advantage of painting the inside and after drying it, to stick the grilles and headlights.

Para los limpiaparabrisas de fotograbado, corto dos palitos redondos que los pinto de negro, y serán la base colocados en los agujeros de la carrocería:

For the photo-etched wipers, I cut two round sticks that I paint them black, and they will be the base placed in the holes of the body:

Más detalles: a los cierres de fotograbado los rodeo con hilo de estaño de 0,1 mm. Vemos la matrícula y la pintura de los pilotos traseros:

More details: to the gravure closures I surround them with 0.1 mm tin wire. We see the license plate and the paint of the rear pilots:

En la parte delantera, la matrícula doblada, las fijaciones de los faros cuneteros y las rejillas de fotograbado:

At the front, the bent license plate, the fixings of the headlights and the photogravure grates:

Las faldillas se sustituyen por unas realizados con lata de refresco:

The flaps are replaced by ones made with a can of soda:

Detalle del faro cunetero:

Detail of the extra lighthouse:

Y las fotos finales, incluyendo el panelado realizado con humo de Tamiya diluido con x20a:

And the final photos, including the paneling made with Tamiya smoke diluted with x20a:

Ahora toca terminar la de Philips que ya está en sus paso finales!!

Gracias por ver y comentar!!

Now it’s time to finish the Philips one that is already in its final stages !!

Thanks for viewing and commenting!!

This entry was posted in Opel Manta 400 GrB Finley (1/24) and tagged , , , . Bookmark the permalink.

3 Responses to Opel Manta 400 GrB Finley C Sainz – Belkits 1/24 (y V)

  1. Juani says:

    Trabajo muy fino..enhorabuena!

  2. Jesus says:

    Un trabajo impresionante, yo lo empezare la semana que viene, me serán de gran utilidad tus explicaciones.
    Muchas gracias

Leave a Reply to Jesus Cancel reply

Your email address will not be published. Required fields are marked *