Mercedes AMG GT3 Gulf – Tamiya 1/24 (III)

Seguimos con el Mercedes Gulf de Tamiya, en el que he estado poniendo calcas de la marca Slotfabric para la carrocería, y de Studio27 para las calcas de carbono. Solo deciros que llevo dos fines de semana poniendo calcas, siendo las de Slotfabric bastante malas, ya que no vienen precortadas, y son muy gordas, además de tener un color Naranja Gulf bastante complicado.

Como siempre, así es como tengo la maqueta, estando el alerón premontado para ver como queda:

We continue with the Mercedes Gulf of Tamiya, in which I have been putting decals of the brand Slotfabric for the body, and of Studio27 for the carbon decals. Just tell you that I was putting decals for two weekends, being Slotfabric quite bad, as they are not pre-cut, and are very fat, in addition to having a very complicated Orange Gulf.

As always, that’s how I have the model, with the spoiler preassembled to see how it looks:

Pero vamos al principio. Dejé la carrocería con los colores azul y naranja. A partir de ahí tocaba lijar con agua las uniones de la pintura, y empezar a poner calcas. Para las líneas negras, corté las líneas de las calcas y las fui poniendo poco a poco hasta que terminé con ellas. Después empecé a poner el resto:

But let’s go to the beginning. I left the body with the colors blue and orange. From that point on, it was necessary to sand the joints of the paint with water, and start putting decals. For the black lines, I cut the lines of the decals and I put them little by little until I finished with them. Then I started to put the rest:

En la carrocería veis también calcas de fibra alrededor de las ventanas, que tendré que repasar con negro, y en los bajos del faldón delantero:

In the body you can also see fiber decals around the windows, which I will have to review with black, and in the lower part of the front skirt:

Ahora vamos a las de Studio27 de fibra. Empezamos por el alerón que lleva un total de 10 piezas, a las que después puse las de las letras encima y en las derivas:

Now we go to the Studio27 fiber. We start with the spoiler that has a total of 10 pieces, to which I put the letters above and in the drifts:

Otras piezas que llevaban carbono son las ópticas delanteras, que tenían 3 calcas cada faro:

Other pieces that carried carbon are the front optics, which had 3 decals in each headlight:

En el chasis, el trabajo grande fue en las derivas, que tenían dos calcas por deriva, con un total de 16, con dos traseras…. Mucho trabajo!!

In the chassis, the big job was in the drifts, which had two decals by drift, with a total of 16, with two rear …. Much work!

El chasis también tenía calcas delante y en los laterales…

The chassis also had decals in front and on the sides …

Y por supuesto para el cockpit:

And of course in the cockpit:

Y para el salpicadero!!!

And for the dashboard!!

El parabrisas también tenía algunas más de las que puse en el post anterior:

The windshield also had some more than those I put in the previous post:

Y como siempre, con ganas de verlo todo, pruebo la carrocería con el alerón:

And as always, wanting to see everything, I test the body with the spoiler:

Ya se va acercando al final, pero queda aun mucho.

Gracias por ver y comentar!!

It is already nearing the end, but there is still much left.

Thanks for viewing and commenting!!

This entry was posted in Mercedes AMG GT3 Gulf (1/24) and tagged , , . Bookmark the permalink.

4 Responses to Mercedes AMG GT3 Gulf – Tamiya 1/24 (III)

  1. Emerson Santa Vica says:

    Great job congratulações

  2. Bálint Répási says:

    Hello,
    Congratulation, you made an amazing job!
    I have a question regarding carbon decals: what did you use to soft them? I tried several liquids, but these Studio27 decals not really working for me…

Leave a Reply to admin Cancel reply

Your email address will not be published. Required fields are marked *