![\"\"](\"http:\/\/blog.maquetea.com\/wp-content\/uploads\/2020\/11\/GTC4-03-5.jpg\")
<\/a><\/figure><\/li>![\"\"](\"http:\/\/blog.maquetea.com\/wp-content\/uploads\/2020\/11\/GTC4-03-6.jpg\")
<\/a><\/figure><\/li><\/ul><\/figure>\n\n\n\nPero esta carrocer\u00eda es grande, pesa mucho y mis bases que uso para pintar no me daban seguridad para atacar a esta carrocer\u00eda, por lo que tuve que comprarme el \u00fatil de Tamiya, que muestro a continuaci\u00f3n:<\/span><\/p>\n\n\n\n
But this bodywork is large, it weighs a lot and my bases that I use to paint did not give me the security to attack this bodywork, so I had to buy the Tamiya tool, which I show below:<\/span><\/p>\n\n\n\n
![\"\"](\"http:\/\/blog.maquetea.com\/wp-content\/uploads\/2020\/11\/GTC4-03-8.jpg\")
<\/a><\/figure><\/div>\n\n\n\nY ya tengo todas las piezas en sus soportes, listas para imprimar. Destacar que la base de Tamiya en la que est\u00e1 colocada la carrocer\u00eda, est\u00e1 recubierta con cinta de enmascarar industrial, de pintor, para que las pinturas, imprimaciones y barnices que aplique a las carrocer\u00edas, no la da\u00f1en y se pueda usar mucho tiempo. <\/p>\n\n\n\n
And I already have all the pieces in their supports, ready to prime. It should be noted that the Tamiya base on which the bodywork is placed is covered with industrial painter’s masking tape, so the paints, primers and varnishes that I’ll apply to the bodywork, do not damage it and can be used for a long time.<\/span><\/p>\n\n\n\n
![\"\"](\"http:\/\/blog.maquetea.com\/wp-content\/uploads\/2020\/11\/GTC4-03-11.jpg\")
<\/a><\/figure><\/div>\n\n\n\nY despu\u00e9s de un d\u00eda, ya est\u00e1n todas las piezas imprimadas con Gravity-Color de Espa\u00f1a:<\/p>\n\n\n\n
And after one day, all the pieces are already primed with Gravity-Color from Spain:<\/span><\/p>\n\n\n\n
![\"\"](\"http:\/\/blog.maquetea.com\/wp-content\/uploads\/2020\/11\/GTC4-03-14.jpg\")
<\/a><\/figure><\/div>\n\n\n\nPodemos ver en la carrocer\u00eda, unas manchas en el morro debidas a un percance que tuve. Hay que lijar para igualar e imprimar de nuevo.<\/p>\n\n\n\n
We can see on the bodywork, some spots on the nose due to a mishap I had. Must sand to level the surface and prime again.<\/span><\/p>\n\n\n\n
![\"\"](\"http:\/\/blog.maquetea.com\/wp-content\/uploads\/2020\/11\/GTC4-03-20.jpg\")
<\/a><\/figure><\/div>\n\n\n\nUna vez arreglada, le he aplicado una esponja de grano 1200 para alisar toda la superficie, y aqu\u00ed teneis la carrocer\u00eda lista para pintar. <\/p>\n\n\n\n
Once fixed, I applied a 1200 grit sponge to smooth the entire surface, and here you have the body ready to paint.<\/span><\/p>\n\n\n\n
![\"\"](\"http:\/\/blog.maquetea.com\/wp-content\/uploads\/2020\/11\/GTC4-03-24.jpg\")
<\/figure><\/li>![\"\"](\"http:\/\/blog.maquetea.com\/wp-content\/uploads\/2020\/11\/GTC4-03-25.jpg\")
<\/figure><\/li>![\"\"](\"http:\/\/blog.maquetea.com\/wp-content\/uploads\/2020\/11\/GTC4-03-26.jpg\")
<\/figure><\/li>![\"\"](\"http:\/\/blog.maquetea.com\/wp-content\/uploads\/2020\/11\/GTC4-03-27.jpg\")
<\/figure><\/li>![\"\"](\"http:\/\/blog.maquetea.com\/wp-content\/uploads\/2020\/11\/GTC4-03-28.jpg\")
<\/figure><\/li><\/ul><\/figure>\n\n\n\nPara la pintura, voy a utilizar el amarillo Ferrari triple strato de Gravity Espa\u00f1a, que contiene una base y un metalizante que se aplica sobre la base. Aqu\u00ed os muestro los botes correspondientes:<\/p>\n\n\n\n
For the paint, I am going to use the triple strato Ferrari yellow from Gravity Spain, which contains a base and a metallizer that is applied over the base. Here I show you the corresponding boats:<\/span><\/p>\n\n\n\n
![\"\"](\"http:\/\/blog.maquetea.com\/wp-content\/uploads\/2020\/11\/GTC4-03-36.jpg\")
<\/a><\/figure><\/div>\n\n\n\nY ya aplicamos la base. Tres capas de pintura como se pueden ver a continuaci\u00f3n, en una vista lateral y en otra del angulo delantero.<\/p>\n\n\n\n
And we already applied the base. Three coats of paint as seen below, in a side view and a front angle view.<\/span><\/p>\n\n\n\n
![\"\"](\"http:\/\/blog.maquetea.com\/wp-content\/uploads\/2020\/11\/GTC4-03-37.jpg\")
<\/a><\/figure><\/li>![\"\"](\"http:\/\/blog.maquetea.com\/wp-content\/uploads\/2020\/11\/GTC4-03-38.jpg\")
<\/a><\/figure><\/li>![\"\"](\"http:\/\/blog.maquetea.com\/wp-content\/uploads\/2020\/11\/GTC4-03-39.jpg\")
<\/a><\/figure><\/li>![\"\"](\"http:\/\/blog.maquetea.com\/wp-content\/uploads\/2020\/11\/GTC4-03-40.jpg\")
<\/a><\/figure><\/li>![\"\"](\"http:\/\/blog.maquetea.com\/wp-content\/uploads\/2020\/11\/GTC4-03-41.jpg\")
<\/a><\/figure><\/li>![\"\"](\"http:\/\/blog.maquetea.com\/wp-content\/uploads\/2020\/11\/GTC4-03-42.jpg\")
<\/a><\/figure><\/li><\/ul><\/figure>\n\n\n\nLas siguientes fotos, nos muestran desde distintos \u00e1ngulos, la carrocer\u00eda ya pintada con la base, a la espera del segundo color que nos dar\u00e1 un acabado met\u00e1lico:<\/p>\n\n\n\n
The following photos show us from different angles, the bodywork already painted with the base, waiting for the second color that will give it the metallic finish:<\/span><\/p>\n\n\n\n
![\"\"](\"http:\/\/blog.maquetea.com\/wp-content\/uploads\/2020\/11\/GTC4-03-43.jpg\")
<\/a><\/figure><\/div>\n\n\n\n![\"\"](\"http:\/\/blog.maquetea.com\/wp-content\/uploads\/2020\/11\/GTC4-03-44.jpg\")
<\/a><\/figure><\/div>\n\n\n\n![\"\"](\"http:\/\/blog.maquetea.com\/wp-content\/uploads\/2020\/11\/GTC4-03-45.jpg\")
<\/a><\/figure><\/div>\n\n\n\n![\"\"](\"http:\/\/blog.maquetea.com\/wp-content\/uploads\/2020\/11\/GTC4-03-46.jpg\")
<\/a><\/figure><\/div>\n\n\n\nRecordad que hab\u00eda opci\u00f3n de elegir dos llantas diferentes, y de las que yo eleg\u00ed las siguientes, que os muestro con la imprimaci\u00f3n aplicada:<\/p>\n\n\n\n
Remember that there was an option to choose two different tires, and that I chose the following, which I show you with the applied primer:<\/span><\/p>\n\n\n\n
![\"\"](\"http:\/\/blog.maquetea.com\/wp-content\/uploads\/2020\/11\/GTC4-03-18.jpg\")
<\/a><\/figure><\/div>\n\n\n\nY una vez secas, les paso la esponja de grano 1200, y las pinto con el aluminio de Zero, de la gama Metal: ZP-M1009<\/a>. Est\u00e1n pintadas junto a las salidas de aire del habit\u00e1culo y de los escapes.<\/p>\n\n\n\n
And once they are dry, I sanded them with 1200 grit sponge, and painted them with Zero’s aluminum, from the Metal range: ZP-M1009<\/a>. They are painted next to the passenger compartment air vents and the exhausts.<\/span><\/p>\n\n\n\n
![\"\"](\"http:\/\/blog.maquetea.com\/wp-content\/uploads\/2020\/11\/GTC4-03-50.jpg\")
<\/a><\/figure><\/div>\n\n\n\nPasamos a la pieza trasera del chasis, que os presento ya imprimada…<\/p>\n\n\n\n
We move on to the rear part of the chassis, which I present to you already primed \u2026<\/span><\/p>\n\n\n\n
![\"\"](\"http:\/\/blog.maquetea.com\/wp-content\/uploads\/2020\/11\/GTC4-03-19.jpg\")
<\/a><\/figure><\/div>\n\n\n\n..y que ha sido pintada de negro semi mate junto a otras piezas m\u00e1s:<\/p>\n\n\n\n
..and that has been painted semi-matt black along with other pieces:<\/span><\/p>\n\n\n\n
![\"\"](\"http:\/\/blog.maquetea.com\/wp-content\/uploads\/2020\/11\/GTC4-03-49.jpg\")
<\/a><\/figure><\/div>\n\n\n\nPasamos al habit\u00e1culo, que va a ir pintado en blanco y negro. Primero, pintamos del blanco de Ferrari de Zero, ZP-1007-7754-04<\/a> todos los asientos, el interior, los paneles de las puertas y el salpicadero:<\/p>\n\n\n\n
We move to the cabin, which will be painted in black and white colors. First, we painted Zero’s Ferrari white, ZP-1007-7754-04<\/a> all the seats, interior, door panels and dashboard<\/span>:<\/p>\n\n\n\n
![\"\"](\"http:\/\/blog.maquetea.com\/wp-content\/uploads\/2020\/11\/GTC4-03-34.jpg\")
<\/a><\/figure><\/div>\n\n\n\n![\"\"](\"http:\/\/blog.maquetea.com\/wp-content\/uploads\/2020\/11\/GTC4-03-23.jpg\")
<\/a><\/figure><\/div>\n\n\n\nIncluso pintamos las asas delanteras de la consola central. Notad, que est\u00e1n fijadas solo por un lado, y con el otro extremo en el aire. Esto es debido a que he usado una cinta autoadhesiva por los dos lados, transparente y muy fina, de la marca Hasegawa, que tiene suficiente fuerza para ello.<\/p>\n\n\n\n
We even painted the front handles of the center console. Notice, that they are fixed only on one side, and the other ends are in the air. This is due to the fact that I have used a self-adhesive tape on both sides, transparent and very thin, from Hasegawa, which has enough strength for it.<\/span><\/p>\n\n\n\n
![\"\"](\"http:\/\/blog.maquetea.com\/wp-content\/uploads\/2020\/11\/GTC4-03-32.jpg\")
<\/a><\/figure><\/div>\n\n\n\nY una vez seco, enmascaramos y pinamos de negro semi mate. Lo colocamos todo sin pegamento para ver el efecto:<\/p>\n\n\n\n
And once dry, we mask and paint them with semi-matte black. We put it all without glue to see the effect:<\/span><\/p>\n\n\n\n
![\"\"](\"http:\/\/blog.maquetea.com\/wp-content\/uploads\/2020\/11\/GTC4-03-47.jpg\")
<\/a><\/figure><\/div>\n\n\n\nEl siguiente paso ser\u00e1 aplicar efectos de sombras y claros con \u00e9leos:<\/p>\n\n\n\n
The next step will be to apply shadows and light effects with oils:<\/span><\/p>\n\n\n\n
![\"\"](\"http:\/\/blog.maquetea.com\/wp-content\/uploads\/2020\/11\/GTC4-03-48.jpg\")
<\/a><\/figure><\/div>\n\n\n\nY si ponemos las gomas en las llantas, y todo en la carrocer\u00eda, \u00e9ste es el resultado:<\/p>\n\n\n\n
And if we put the tires on the rims, and everything on the body, this is the result:<\/span><\/p>\n\n\n\n
![\"\"](\"http:\/\/blog.maquetea.com\/wp-content\/uploads\/2020\/11\/GTC4-03-51.jpg\")
<\/a><\/figure><\/div>\n\n\n\nOtra pieza que he terminado es la rejilla delantera. Como eran piezas de fotograbado que encajaban entre si, las puse sobre blue tack y las fui encajando hasta que todas las piezas cuadraron, y entonces fui poniendo gotas de ciano con un palillo de madera….<\/p>\n\n\n\n
Another piece that I have finished is the front grill. As they were pieces of photoengraving that fit together, I put them on blue tack and I was fitting them until all the pieces were square, and then I was putting drops of cyano with a wooden toothpick \u2026<\/span><\/p>\n\n\n\n
![\"\"](\"http:\/\/blog.maquetea.com\/wp-content\/uploads\/2020\/11\/GTC4-03-13.jpg\")
<\/a><\/figure><\/div>\n\n\n\n…hasta que termin\u00e9 y se peg\u00f3 entero:<\/p>\n\n\n\n
\u2026 until I finished it and it was pasted whole:<\/span><\/p>\n\n\n\n
![\"\"](\"http:\/\/blog.maquetea.com\/wp-content\/uploads\/2020\/11\/GTC4-03-17.jpg\")
<\/a><\/figure><\/div>\n\n\n\nLo siguiente ser\u00e1 terminar la pintura de la carrocer\u00eda y del interior.<\/p>\n\n\n\n
The next thing will be to finish the body painting and interior.<\/span><\/p>\n\n\n\n
Gracias por ver y comentar!!<\/p>\n\n\n\n
Thanks for viewing and commenting!!<\/span><\/p>\n","protected":false},"excerpt":{"rendered":"
Comenzamos el Ferrari, y despu\u00e9s de una limpieza de rebabas, un panelado de las l\u00edneas y una lijada con esponja de grano 600, lavamos las piezas con detergente para eliminar restos de polvo y grasas de la resina: We started … Continue reading