But I left the process in the absence of decals, and here they are! Very good with four possible decorations. Mine, the rally Valeo !!<\/span><\/p>\n Putting them has been a real pleasure: thin and resistant! In addition, the exact measurements! (why will it be that I know them well !! :-))<\/span><\/p>\n Otro detalle de las calcas, son las que llevan los faros auxiliares, que previamente sin el cristal he tapado con Evergreen y pintado.<\/p>\n Another detail of the decals, are the ones that carry the auxiliary headlights, that previously without the glass I have covered with Evergreen and painted.<\/span><\/p>\n Another new feature of Decalcas: the 10-piece Braid wheels, made in two parts. Very good with a good touch. In this case they are for the front wheels:<\/span><\/p>\n First, the primer with Gravity !!<\/span><\/p>\n I put chromo spray to the rings, and the core is painted in white:<\/span><\/p>\n And here they are in place, with Tamiya Smoke wash diluted to 50%. Missing is a layer with black matte diluted:<\/span><\/p>\n And after the decals, the lacquer: three layers of Gravity, two thin and a third more humid, leaving 5\/10 minutes between each layer:<\/span><\/p>\n But things do not always go well! I supported the bodywork when lacquering and this happened: it was filled with little dots of something I had on the table when I painted it!<\/span><\/p>\n So let’s go to the work! Mask and sandpaper:<\/span><\/p>\n …primer…<\/span><\/p>\n … and we painted it yellow! Then I clearcoated the whole body again!<\/span><\/p>\n Now is the turn of the black parts: we delimit the edges of the windows with mask:<\/span><\/p>\n From there, we cover the rest:<\/span><\/p>\n And we painted it with black X18 from Tamiya:<\/span><\/p>\n And this is the result:<\/span><\/p>\n Let’s move to the rear lights: the glasses painted with edding 3000 marker, and the bottom of the lighthouse with Molotow:<\/span><\/p>\n License plates and base “Michelin” are made with soda can, folded according to existing photos!<\/span><\/p>\n The front turn signals have the same process as the rear lights<\/span><\/p>\n We see the license plate and the headlights:<\/span><\/p>\n And here the final photos with everything added!<\/span><\/p>\n Thanks for viewing and commenting!!<\/span><\/p>\n","protected":false},"excerpt":{"rendered":" Y tambi\u00e9n llega ya el final para este modelo!! Esta es la foto final: And the end also comes for this model! This is the final photo: Pero el proceso lo dej\u00e9 a falta de calcas, y aqu\u00ed est\u00e1n! Muy … Continue reading ![\"\"](\"http:\/\/blog.maquetea.com\/wp-content\/uploads\/2018\/11\/400-Phil-05-79.jpg\")
<\/a>Pero el proceso lo dej\u00e9 a falta de calcas, y aqu\u00ed est\u00e1n! Muy buenas con cuatro posibles decoraciones. La m\u00eda, la del rallye Valeo!!<\/p>\n<\/a>Ponerlas ha sido un verdadero placer: finas y resistentes!! Adem\u00e1s, las medidas exactas!! (por qu\u00e9 ser\u00e1 que las conozco bien!! :-))<\/p>\n<\/a> <\/a> <\/a><\/p>\n<\/a>Otra novedad de Decalcas: las llantas Braid de 10 palos, realizadas en dos partes. Muy buenas con un buen detalle. En este caso son para las ruedas delanteras:<\/p>\n<\/a>Lo primero, imprimar con Gravity!!<\/p>\n<\/a>A los aros, le pasamos con chromo a spray, y al n\u00facleo lo pintamos de blanco:<\/p>\n<\/a>Y aqu\u00ed est\u00e1n en su lugar, con un lavado de Smoke de Tamiya diluido al 50%. Falta ensombrecerlas con negro mate diluido:<\/p>\n<\/a>Y despu\u00e9s de las calcas, la laca: tres capas de Gravity, dos finas y una tercera mas h\u00fameda, dejando 5\/10 minutos entre cada capa:<\/p>\n<\/a> <\/a> <\/a> <\/a> <\/a> <\/a> <\/a> <\/a>Pero no siempre salen las cosas bien!! Apoy\u00e9 la carrocer\u00eda al lacar\u00a0 y pas\u00f3 esto: se llen\u00f3 de unas puntitos de algo que ten\u00eda sobre la mesa al lacar!<\/p>\n<\/a>Pues nada, al l\u00edo!! M\u00e1scara y lija:<\/p>\n<\/a>…imprimamos…<\/p>\n<\/a>…y pintamos de amarillo! Despu\u00e9s laqu\u00e9 otra vez toda la carrocer\u00eda!!<\/p>\n<\/a>Toca el turno de las partes negras: con m\u00e1scara delimitamos los bordes de las ventanas:<\/p>\n<\/a>A partir de ah\u00ed, tapamos el resto:<\/p>\n<\/a>Y pintamos con negro X18 de Tamiya:<\/p>\n<\/a>Y este es el resultado:<\/p>\n<\/a>Pasamos a los faros traseros: los cristales pintados con rotulador edding 3000, y el fondo del faro con Molotow:<\/p>\n<\/a>Las matr\u00edculas y la base de “Michelin” est\u00e1n hechas con lata de refresco, dobladas acorde a las fotos existentes!<\/p>\n<\/a>Los intermitentes delanteros tienen el mismo proceso que los faros traseros<\/p>\n<\/a>Vemos la matr\u00edcula y los faros puestos:<\/p>\n<\/a> <\/a>Y aqu\u00ed las fotos finales con todo puesto!<\/p>\n<\/a> <\/a> <\/a> <\/a> <\/a> <\/a> <\/a> <\/a> <\/a> <\/a>Gracias por ver y comentar!!<\/p>\n